Toolless Keystone Jacks vs Punch Down Keystone Jacks Leave a comment

If you want to extend your home network in the coming years, you’ll need to know which types of jacks you’ll need to connect your devices safely and securely.

Toolless keystone jacks are distinguished by the following features that includes the conductor wires are pushed into the IDC by a hinged cover (either 90 degree or 180 degree) metal pins for contact.

In some circumstances, a zip tie is used to keep the toolless mechanism closed. A strain relief bar is a device that prevents cable jacket pressure from causing conductor wires to slip and generating a loose connection. As a result, the overall length of the jack increases.

While the Punch down keystone jacks have the following characteristics that includes with the exception of the IDC cap, this is a one-piece design. Conductors are prevented from pulling out of IDC slots by using an IDC cap.

On the sides of the jack, color code for the right wiring sequence is printed. There is no need for a strain relief bar. Also, Overall length is shorter. And there are fewer parts to lose.

  • The RJ45 coupler is usually less expensive, but the punch down keystone jack is more difficult to install.
  • Of course, the cost is far greater than the Punch down keystone jack.
  • The punch down is more prone to human error, it will be tough to not only install but also reinstall if difficulties arise.
  • As a result, toolless keystone jacks have been introduced to the market, allowing for quick installation without the need for a punch down tool.
  • Toolless keystone jacks will also be much easier to close, which is especially true for shielded Ethernet cable or cable with thick insulated conductors like Cat6A kinds.
  • Punch down keystone jacks differ in that they require a tool to punch the individual wire conductors into the IDC slots.
  • There’s no separate conductor holding cap to wire up, and there’s no hinged mechanism to close it.
  • Toolless keystone jacks are more expensive per jack, but they don’t require a punch down tool.
  • Punch down keystone jacks is less expensive, but they require specialized tools that must be used just once.
  • Punch down keystone jacks are physically shorter, allowing for installation in confined locations like ancient building.

For walls with limited clearance, punch down keystone jacks is recommended.

All keystones are interchangeable and replaceable, regardless of the type of jack they hold. This allows for a lot of freedom in how many various types of electrical jacks can be arranged and mounted on a single plate or panel without requiring custom manufacture.

Leave a Reply

Your email address will not be published.